top of page
Mini-Maxx-without-Background.png

DIESEL PERFORMANCE PROGRAMER

Introducing the next generation of diesel downloaders that offers everything a Diesel truck owner could want, all in one high-tech unit. 

Untitled design-5.png
The App

Simply the best tuner for improving fuel efficiency and horsepower on your truck!

maxxx.png

Join millions of happy users

The Mini Maxx V2 tuner is the most advanced and powerful tuner on the market. With its easy-to-use interface, you can unlock more horsepower and torque to meet the unique demands you put on your truck with less fuel consumption.

The Mini Maxx V2 allows the removal of the DPF/EDR/DEF systems and ALL related sensors.

Features

Features

The best tuner for making your truck more powerful and fuel efficient

* Allows removal of the DPF system and ALL related sensors (nothing needs to go into the race exhaust)

  

*Easy to use with on-screen instructions

 

* Allows removal of the entire EGR system including cooler with no trouble codes

 

* Turn off EGR without removing ANY parts

 

* Read / Clear Diagnostic Trouble Codes

 

* Internet updateable with included SD Memory Card and USB Cable

 

* Digital gauges to monitor 20+ parameters

 

Ford.png
Installation

Installation Information

The Mini Maxx V2 is a delete-only tuner designed for off-road, race, and agricultural use. You must remove the emissions systems after installation.

Before Installation:
  • You will need a battery charger capable of supplying at least 10A steady; without this, you risk damaging your PCM.

  • Make sure you do not have any emissions-related error messages on the dash; these messages can only be cleared with the truck 100% stock.

  • ALWAYS install the tuner before installing any hard parts

Installation

  • Connect your battery charger, then connect the tuner. Once powered on, just follow the on-screen instructions until the installation is complete. 

  • After the tuner has been installed, you can start the engine and let it run for 15-20 seconds just to verify there are no error messages or CELs. 

  • After confirming there are no issues, you will need to physically remove the DEF/DPF/SCR section of the exhaust. Leave any sensors in these pipes and disconnect the connectors. [We recommend packing the connectors with dielectric grease and taping them up to prevent future corrosion]

  • The EGR system must either be fully removed or at least disconnected

  • Ford & RAM - Unplug the throttle valve in the fully open position

*2018+ RAMs require a bypass cable (#42215). You must use this bypass cable or you can corrupt your PCM. This bypass cable comes with a replacement OBD Box and USB cable. Replace the OBD box that comes with the Mini Maxx with this bypass version with the red stripe. You will only use this OBD box on the 18+ RAMs. Connect one end of the USB cable into the port on the side of the OBD box and the other side to the green connector behind the dash into the 5th port down on the connector closest to the driver's seat.  

Reviews
I have had my Mini Maxx V2 for a little while now and I absolutely love it! It has improved my fuel economy by quite a bit. I would highly recommend it to anyone who wants to improve their fuel economy.

Joan Marks

I'm very impressed with the Mini Maxx V2. It has allowed me to delete my DPF system which was causing me a lot of problems. The Mini Maxx V2 is very easy to use and it has a lot of great features. 

Raymond Souza

I love my Mini Maxx V2! It has given me more horse power and torque to my truck while helping me to save gas. I highly recommend this product to anyone looking for a boost in their truck!

Chris Stalk

Satisfied Users

Mini-Maxx-BW-without-Background.png
bottom of page